跳转到主内容

This is a troubleshooting and installation guides device page for the Sony PS2 Slimline (SCPH-750xx). The Sony PlayStation 2 Slimline computer system is small, slim and a network ready game console.

33 个问题 查看全部

PlayStation 2 slim SCPH - 75003. „The disc could not be read.”

Hi guys,

 

I have a problem with my PlayStation 2 slim SCPH - 75003. The issue is „The disc could not be read.” It doesn’t happens all the time. Actually right now it is most of the time, but after few times to lunch a game it starts. But after power of on the issue is there again. I checked the switches which are confirming that the disk lead is closed and they looks fine. I opened the PS 2 to check woh the issue looks like and I see that the disc is spinning but after a while it is stopping. Does anybody has a clue what can be the issue here? I will attach the video of to here bellow:

https://youtu.be/H94xhPKatxo?feature=sha...

回答此问题 我也有这个问题

这是一个好问题吗?

得分 0

1条评论:

Try to clean the motor

完成的

添加一条评论

1个答案

@sentinellkrk since you get the error „The disc could not be read” you will either have to clean your laser or replacing it. I'd start with cleaning it. Get any of the commercially available disk lens cleaners and run it a couple of times. You can also try and adjust your laser. Be careful with this and make sure that it you go this route that you measure your pot values before adjusting them. You can easily burn out your laser by going wild on it. SInce there is no good guide out for this (yet) follow something like these intructions

While you work on your PS2, take lots of pictures. Once you are done with it, take those pictures and create a guide for iFixit. That will help the next person that has a device with the same issues as you do. It's easy and fun to create these guides. https://ifixit.com/Guide/new The iFixit community will appreciate this.

Repair is War on Entropy!

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

Sentinell_krk 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 8

过去 30 天: 40

总计 40