更多选项

Can't see the device after replacing disk

My ipod video stopped working. It would either say the battery was low or it would just display the support web address. I decided to replace the disk and since I was replacing it I upgraded from 30gb to 60gb. I purchased a new battery, headphone/hold switch, front, back and disk. Now it just clicks. I can't see it in iTunes or windows "My Computer". Nothing shows up on the display. Any ideas?

Thanks.

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 -1

添加一条评论

发帖于: 2012年3月24日

更多选项

gocleveland, check your HDD cable. I have had plenty of 5th gen iPod that had a broken cable. Make sure that you check the way it is inserted. It is possible that it is broken as well. Anytime I now change a HDD I also replace the cable. Also make sure that you replace the HDD with the same brand. I do know that the Toshiba and Hitachi drive require a separate HDD cable. If you can, get a USB-to-ZIF adapter and check your HDD separate from your iPod. Hope this helps, good luck.

这个答案有帮助吗？

是否

得分 1

添加一条评论

第五代iPod/iPod Video

Can't see the device after replacing disk

1个答案

添加你的答案