修复你的物品 社区 商店

A1706/EMC 3071—于2016年11月上市，这台13''MacBook Pro带有OLED触摸条。以双核“Skylake”英特尔酷睿i5 CPU和4个雷电3端口为特征。

239 个问题 查看全部

更多选项

1RS fell off during battery replacement, fan on constantly

I recently replaced my battery, tested and it’s working fine.

I noticed when I initially removed the lower case a “1RS” was out of place. I’m not sure if this happened when I was removing the case.

  1. what is a 1RS?
  2. Can it be replaced (soldered back into place)
  3. Do I need a new part?

When I turned my MacBook on, the battery was working perfectly, charging etc, however the fan has been on constantly.

I’ve preformed a SMC, PRAM & NVRAM reset and the issue with the fan still exists.

Block Image

回答此问题 我也有这个问题

这是一个好问题吗？

是 否
得分 2
添加一条评论

1个答案

筛选条件:
最有帮助的 最新 最老的

更多选项

@bmcdermott that is reference designator L3500 which is a PIM B062D-SM series 1.5UH 20% 12.5A 0.017OHM inductor. The series is hard to match but the inductor is available at places like this Even so the series is different, it will still fit the solder pads. If unsure of that download the datasheet for the inductor from the site I linked to and it will have the dimension for the solder pads on there. Does not look like it is related to your fan issue at all but it is part of the TBT 5V regulator circuit.

这个答案有帮助吗？

是 否
得分 0
添加一条评论

添加你的答案

Oonagh 将永远感激不已
浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 18