声誉积分: 421
7
1
1
This morning I accidentally fried my R3 I don’t know how, it was hooked up to the 9V battery and it was running blink as a test suddenly the lights went out and the 47uf capacitors started getting hot. So it’s time for an upgrade I have the R4 on its way but is there any way to get the R3 temporarily working
声誉积分: 783.2千
1.1千
893
2.3千
@thomas35549 a blown fuse would not cause this, If anything I would suspect the voltage regulator U1 (AMS1117) next to your DC In Jack.
Here is the layout Uno 3 Component Layout and here is the schematic Uno 3 Schematic The datesheet for the voltage regulator is here AMS1117
这个答案有帮助吗？
Ok thank you
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 8
总计 48
2条评论
It might be a blown capacitor, can you check?
由 Ryan 完成的
@ryan0001 idk how also I don’t have a volt meter available I believe I blew a fuse and that is causing them to get hot
由 Thomas 完成的