Samsung Ultrawide monitor LC49HG90 - Is it a T-Con problem?

@andrasfodor could be but it's unlikely. Once it has been on for a while, does the picture turn all clear? If so, then this could be either a bad solder joint or failing capacitors etc. WE really would need to see the circuit boards etc. which may show some damage. Also, if you have a thermometer, you could measure the temp on your GPU. Based on the symptoms your describe and the display error, my first suspect here is actually the main board.

BTW nice monitor! :-)

这个答案有帮助吗？

是否

得分 2

10条评论:

Thank you for the quick answer.

Yes, after this 5-30 minutes "warmup" time, it turns all clear.

Ok, I'll dissassemble it's back and show the circuit boards.

Do you mean GPU in my computer? I don't think that is faulty, because the error is the same on different sources.

由 András Fodor 完成的 2023年11月7日

@andrasfodor no, not the one on your computer but the one on the mainboard of your monitor. A monitor that size and with all those options, needs a lot of processing power so that will all be done on the mainboard for the monitor.

由 oldturkey03 完成的 2023年11月7日

Here is a video they are dissassembling a monitor like mine:

https://youtu.be/Rzx2Air5-Vo?si=lWqUbOoh...

The middle case that contains the main board, doesn't it? If I have to take out the case how can I measure the temp of its parts? I have thermal camera BTW.

Thanks!

由 András Fodor 完成的 2023年11月7日

@andrasfodor You'd have to remove the metal casing around the board to get to it. After that you can most likely plug it is again. Of course you also want to check the other boards. I really like the way they have everything shielded etc. It is a clean modular look. Not the most fun to repair it but definitely clean lines etc.

由 oldturkey03 完成的 2023年11月7日

@andrasfodor Did you even fix the issue? I have the exact same issue.

由 Steve Schlosnagle 完成的 2024年1月16日

显示更多的5条评论

添加一条评论

Samsung Display

Samsung Ultrawide monitor LC49HG90 - Is it a T-Con problem?

1个答案

添加你的答案