I didn't want to solder the blue

Question

PlayStation 4

索尼的新一代电视游戏机，于2013年2月20日发布，并于2013年11月15日开售。

1700 个问题查看全部

E A @mzhbxhwfgvmubmf

声誉积分: 23

2

发帖于: 2023年8月26日

更多选项

I didn't want to solder the blue

Hello I have similar problem, just for the yellow line anywhere on the board would be fine?

@oldturkey03 Really sorry for bothering you but I can afford a ps4 and I'm trying to do it my self

I didn't want to solder the blue directely to the capacitor so I prefered to the line

Tried scratching it

Do you know if these are connected or whole different lines?

Thanks again for the help

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 1

添加一条评论

1个答案

已选择的解决方案

oldturkey03 @oldturkey03

声誉积分: 784.6千

1.1千

894

2.3千

发帖于: 2023年8月25日

更多选项

@mzhbxhwfgvmubmf anywhere within that area on the board will work

@mzhbxhwfgvmubmf yes, you could have just connected it to the Via. (That is the name for the hole in the board :-)

Try to use smaller tools for this. Get a cheap scalpel from the local animal supply store or similar and scrape carefully. I'd try some solder mask around the Via and solder the wire on after. You know it would have been easier to solder to the capacitor ;-)

这个答案有帮助吗？

是否

得分 1

4条评论:

Perfect thanks a lot one last request plz for the blue line (connecting to the capacitor) I will put a little wire but is their a temperature limit for not burning the capacitor?

( I only have these 2 pads removed)

由 E A 完成的 2023年8月25日

@mzhbxhwfgvmubmf I usually use wires from either an old small transformer that I took of a TV board or from an old display cable. There is not enough amperage to have to about it being melted.

由 oldturkey03 完成的 2023年8月25日

So the 2 scraches ( pinned by arrows) are from 2 differents rails? If yes I'm gonna give a shot with the capicitor :)

由 E A 完成的 2023年8月26日

@mzhbxhwfgvmubmf yes, you need to keep those separated.

由 oldturkey03 完成的 2023年8月26日

添加一条评论

Perfect thanks a lot one last request plz for the blue line (connecting to the capacitor) I will put a little wire but is their a temperature limit for not burning the capacitor?

( I only have these 2 pads removed) — E A
@mzhbxhwfgvmubmf I usually use wires from either an old small transformer that I took of a TV board or from an old display cable. There is not enough amperage to have to about it being melted. — oldturkey03
So the 2 scraches ( pinned by arrows) are from 2 differents rails? If yes I'm gonna give a shot with the capicitor :) — E A

PlayStation 4

I didn't want to solder the blue

1个答案

Update (08/26/23)

添加你的答案