Swap tcon Hisense 55p7 65r7

Question

Hisense 55P7

4 个问题查看全部

Thread @anitak71969

声誉积分: 72

3

发帖于: 2023年8月1日

更多选项

Swap tcon Hisense 55p7 65r7

Hi, can I use a tcon from 65”tv in 55”? The model is different obviously but am curious as to what could go wrong. My tv was flickering and so far I changed a power board and main board from a newer model (which works fine by the way) but it still flickers after an hour of watching. So the only part left is Tcon :)

Thanks for answers

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 1

添加一条评论

2个答案

已选择的解决方案

oldturkey03 @oldturkey03

声誉积分: 782.4千

1.1千

893

2.3千

发帖于: 2023年8月1日

更多选项

@anitak71969 if all the connections match, yes you can use it. However, at times the boards have an EEPROM IC that is programmed for the different TV. You may have some disturbance or picture issue. If the electrical connection is identical, you can at least give it a try. looks like your 55" model is a 50T32-C0D TX-5555T32C34 board and your 65" is a 55T36-C04 TT-5565T50C34 Let's see if we find out more information about compatibility.

Anyhow, the flickering can also be caused by the panel and bad ribbon cables. You do want to check those as well.

这个答案有帮助吗？

是否

得分 0

2条评论:

Thanks @oldturkey03, you are the best. Connections are the same for both Tcons. I will definitely check the ribbons as well. I salvaged everything from 65r7 so it should work. And if it's the panel I don't think I can do anything about it. Replacing seems to be too expensive.

由 Thread 完成的 2023年8月1日

@anitak71969 when you check the T-Con board, take a simple look at the lines going to the connectors. the thicker ones are usually power lines and the smaller ones, datalines. Make sure that those look about the same for both boards. You can always try a tape-off if it is the panel. Not 100% but it gives you something like a 75-80% chance of fixing it. At least temporarily. Best of luck with your repairs. Remember this ;-)

Repair is War on Entropy!

由 oldturkey03 完成的 2023年8月1日

添加一条评论

Thanks @oldturkey03, you are the best. Connections are the same for both Tcons. I will definitely check the ribbons as well. I salvaged everything from 65r7 so it should work. And if it's the panel I don't think I can do anything about it. Replacing seems to be too expensive. — Thread
@anitak71969 when you check the T-Con board, take a simple look at the lines going to the connectors. the thicker ones are usually power lines and the smaller ones, datalines. Make sure that those look about the same for both boards. You can always try a tape-off if it is the panel. Not 100% but it gives you something like a 75-80% chance of fixing it. At least temporarily. Best of luck with your repairs. Remember this ;-)

Repair is War on Entropy! — oldturkey03