声誉积分: 37
1
We recently replaced the circuit board on our Bose AWRCC1 because the CD was skipping and freezing. When we connected everything again, it does not power on. Is there something that we need to "reset" in order for the unit to turn back on? Thanks for any help.
声誉积分: 784.4千
1.1千
894
2.3千
@schnauzermom you should not have to any reset to have it powered up. Check your work to make sure that everything is properly connected. I would try the old board and see if this is caused by the replacement. If it comes on with the old one,but not the new one, you know that it is the board that is faulty. Let us know whcih board you had and which one your repalced it with. Post images of both so we can see if there are obvious things wrong. 在已经存在的问题里加入图片
这个答案有帮助吗？
过去 24 小时： 0
过去 7 天： 3
过去 30 天： 13
总计 164
