DS won't calibrate correctly on one side of the screen.

Question

Nintendo DS Lite

This Nintendo DS Lite was released in 2006 as the successor to the Nintendo DS. Getting inside this device is simple, making for easy fixes.

318 个问题查看全部

Yuka is Sleepy @yukaissleepy

声誉积分: 37

2

发帖于: 2023年5月10日

更多选项

DS won't calibrate correctly on one side of the screen.

Hi! I've recently switched out the bottom screen of my DS because it was dying. The replacement screen however seems weird. Input is a lot to the left although I touch somewhere on the right. Calibration isn't working properly and only lets me go round and round for eternity unless I misinput on the bottom right point or entirely, but that's not the point of the calibration.

The left two points are always rightly calibrated, but the right ones are either very far to the left or to the right. The screen and rims are clean. Can someone help? I don't want to waste any more hours on the calibration screen :(

回答此问题我也有这个问题

这是一个好问题吗？

是否

得分 0

1条评论

In case the question pops up - no cables are damaged or falsely connected, connectors are also all clean. I've taken my DS at least 20 times apart just to see what the issue is and I'm getting more and more frustrated :(

由 Yuka is Sleepy 完成的 2023年5月10日

添加一条评论

1个答案

In case the question pops up - no cables are damaged or falsely connected, connectors are also all clean. I've taken my DS at least 20 times apart just to see what the issue is and I'm getting more and more frustrated :( — Yuka is Sleepy

darth mango @darthmango 声誉积分: 2.1千 17 4 11 · Answer 1 · 2023-05-10T06:18:55-07:00

最有帮助的答案

darth mango @darthmango

声誉积分: 2.1千

17

4

11

发帖于: 2023年5月10日

更多选项

By "bottom screen" do you mean the LCD, digitizer, or both? If you only swapped one, check that the digitizer is properly aligned with the LCD. It's a long shot, but the other cause would most likely be a bad digitizer, so I'd say it's worth checking. If it's aligned and the problem persists, you'll probably need to replace the digitizer

这个答案有帮助吗？

是否

得分 1

1条评论:

I meant the digitizer, sorry! It's 100% correctly aligned. I've swapped both just to be safe. Am getting a replacement digi, hope it'll be fixed, if not I'LL cry

由 Yuka is Sleepy 完成的 2023年5月10日

添加一条评论

Nintendo DS Lite

DS won't calibrate correctly on one side of the screen.

1个答案

添加你的答案