修复你的物品 社区 商店

于2019年11月发售的MacBook Pro 16''的维修指南和拆解信息。型号A2141，EMC 3347。

211 个问题 查看全部

更多选项

No power after screen replacement. Please help me find this part!

Block Image

I replaced the screen on a 16” 2019 model, and the last thing I had to do was connect the battery cable to the (7 pin ribbon cable connection on the logic board I believe) and the “pressure” clip broke off so I think that might be the problem. No connection? Where can I find this replacement part?

UPDATE:

Had a buddy microsolder a new one on, and it booted for one second then shut off and now no response. Any ideas? Could it be a bad connection? Or did we just fry the logic board?

回答此问题 我也有这个问题

这是一个好问题吗？

是 否
得分 0
添加一条评论

2个答案

筛选条件:
最有帮助的 最新 最老的

更多选项

You don’t need to replace the full connector, just the latch part. I would try to find it as it can be put back as it’s not uncommon to snap off.

这个答案有帮助吗？

是 否
得分 0
添加一条评论

更多选项

cole Wengender the connector is a Fujikura/DDK FF14A-6C-R11DL-B-3H. You can get it on some places as a single item, others require you to buy at least 10. Do an online search with that number and see what will work for you. Then get yourself a few of those and gently lever one side, then the next side of the lock out of the connector. Transplant that lock to your connector.

这个答案有帮助吗？

是 否
得分 0
添加一条评论

添加你的答案

cole Wengender 将永远感激不已
浏览统计数据:

过去 24 小时： 2

过去 7 天： 4

过去 30 天： 8

总计 89