Ipad3g dead, was crushed

Question

iPad 3G

First-generation Apple iPad with 3G capabilities. Model Number A1337. Available with 16, 32, or 64 GB of storage. Repairs are straightforward and do not require heat.

71 个问题查看全部

JCM @jcm67999

声誉积分: 37

4

1

发帖于: 2012年1月8日

更多选项

Ipad3g dead, was crushed

I received an iPad3g that was ran over. While the display and touch panel were broken, the internal parts did not look bad. I cleaned it up and put it back together. The display shoes white light so I ordered a new display and touch pad. I put it all together doublecheching all connections but now it is dead. While it was apart I tested the battery pack and it tested good. Prior to taking it apart I had put the new screen and noticed that the battery was almost dead as the display worked but when I attempted to charge the unit overnight it did not charge. Also, it did not get detected by my laptop and I tunes diagnostics could not communicate with it. Does anyone have any schematics with testing points I can use to diagnose? Note I disassembled this device down to the shell in order to reform the warped shell.

Thanks

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 3

添加一条评论

2个答案

已选择的解决方案

oldturkey03 @oldturkey03

声誉积分: 781.6千

1.1千

893

2.3千

发帖于: 2012年1月8日

更多选项

JCM, schematics for any Apple device are a very rare commodity. It sounds to me like all of your errors are leading to the dock connector. I would start with that one and work from there.

JCM, good luck with your repair. I hope it will work out for you. The same diagram is available at pinout.ru and has some more information as well ;-)

这个答案有帮助吗？

是否

得分 3

4条评论:

Thanks oldturkey03. I found out there is a storefront near me and it is listed as being an authorized Apple repair shop. Il see if I catch them on Monday and see if they can guide me so wish me luck..I actually found pin-outs for the connector on some music site where a guy customizes an IPad, here is the blog link which can come handy. http://gfgsm.blogspot.com/2011/02/apple-...

由 JCM 完成的 2012年1月10日

Some of those pinouts will be useful and I also found some more,thanks. I went to the Apple authorized repair place and it was a joke. They said that IPads are not repairable just swappable through Apple. I thought that a few years ago the FTC or commerce dept had created a law that stated certain consumer products needed to be supported by the manufacturer but I could be wrong. I pulled the pins off one of the connectors yesterday taking it apart again :( so now I have a liitle more to work on soldering tiny pins. The dock cable is a little costly to purchase so I may just have to put the project on the side if I can't figure the wiring for troubleshooting. I'll see if some else gives me another broken one and swap parts out to narrow down the problem.

由 JCM 完成的 2012年1月17日

Sounds reasonable, let us know how it is going :-) best of luck to you.

由 oldturkey03 完成的 2012年1月17日

If you decide it's not worth a fix, I found a student that is looking for a BAD logic board for a school project ... for the right price you could get it off your hands and help a young fellow geek out...

Any Body know where I can get a broken iPad Logic Board?

由 Country Computer Service 完成的 2012年1月18日

添加一条评论

Thanks oldturkey03. I found out there is a storefront near me and it is listed as being an authorized Apple repair shop. Il see if I catch them on Monday and see if they can guide me so wish me luck..I actually found pin-outs for the connector on some music site where a guy customizes an IPad, here is the blog link which can come handy. http://gfgsm.blogspot.com/2011/02/apple-... — JCM
Some of those pinouts will be useful and I also found some more,thanks. I went to the Apple authorized repair place and it was a joke. They said that IPads are not repairable just swappable through Apple. I thought that a few years ago the FTC or commerce dept had created a law that stated certain consumer products needed to be supported by the manufacturer but I could be wrong. I pulled the pins off one of the connectors yesterday taking it apart again :( so now I have a liitle more to work on soldering tiny pins. The dock cable is a little costly to purchase so I may just have to put the project on the side if I can't figure the wiring for troubleshooting. I'll see if some else gives me another broken one and swap parts out to narrow down the problem. — JCM
Sounds reasonable, let us know how it is going :-) best of luck to you. — oldturkey03
If you decide it's not worth a fix, I found a student that is looking for a BAD logic board for a school project ... for the right price you could get it off your hands and help a young fellow geek out...

Any Body know where I can get a broken iPad Logic Board? — Country Computer Service

kerri @kerri64459 声誉积分: 329 6 2 1 · Answer 1 · 2014-02-04T19:18:42-07:00

kerri @kerri64459

声誉积分: 329

6

2

1

发帖于: 2014年2月4日

更多选项

Ou after all that it's sounds like u need a new charge port a super easy repair!

这个答案有帮助吗？

是否

得分 0

添加一条评论

iPad 3G

Ipad3g dead, was crushed

2个答案

Update

添加你的答案