跳转到主内容

A hand-held video camera manufactured in 2008 by Panasonic.

1 个问题 查看全部

Powering camera without original power supply or battery

I have a very limited budget. Power supplies or batteries are very expensive for me.

Is there a good fix?

i think i can't power it via usb or AV.

So should I solder directly to battery connectors and use some power supply?

Do you guys have some better ideas?

回答此问题 我也有这个问题

这是一个好问题吗?

得分 1
添加一条评论

1个答案

最有帮助的答案

maciulex we don't know what you have available to power up your camera. Let us know what you have in your possession or what you can get, that could function as a power supply. Your camera will need DC 9.3V and 1.2A to get it to operate. You are right, your USB port is not going to work for it. If you have any other power supply that can provide that voltage or higher, we can probably come up with something. Looks like the original DC cables connected through the battery connector. If you have an old battery it could probably be modified to function as an adapter.

Block Image

Post pictures of the battery, if you have it, as well as the battery compartment of your camera.

在已经存在的问题里加入图片

这个答案有帮助吗?

得分 1

5条评论:

I lost battery, but pretty recently, so I will try find it today it's still very possible

I have power supply 12v 1.25A

Resistor starter kit, it's have all basic values

Zenner diodes 3.3v and 4.7v 0.5w

And welding machine

I think it can work out if I find the battery and it will be pretty awesome

Then I need a good way of dropping voltage and safe way to open the battery

完成的

@maciulex okay we know we need to step the voltage down by 3 Volts (12V-9V)Now we need to find how many ohms of resistance we need, we'll use

R=V/A

R=3V/1.25A

R=2.4 Ohm

You'd be looking at 3.7 Watt power so you need a beefy resistor. Or you could use two resistors with the 1st resistor of 1/3 the resistance and the second resistor with the last 2/3 resistance. Something like 800 mOhms and 1.6 Ohm

完成的

10 Ω

22 Ω

47 Ω

100 Ω

220 Ω

470 Ω

1 kΩ

2.2 kΩ

4.7 kΩ

10 kΩ

22 kΩ

47 kΩ

100 kΩ

220 kΩ

470 kΩ

1 MΩ

and they had as i read in shop 0.5 w

they not good enought propably should i stack a bunch of them i had 10 of each

完成的

I had a lot of luck, I found DC adapter so it's like a battery, but with an already cable in it was going to DC adapter that's still lost

I've tried some voltage divider or just resistors, but Amps go to low also I tried power it with single 9v battery and red light start flashing but I don't know what it's meant but there are three options

1 camera is broken

2 to low voltage

3 to low Amps

完成的

I bet its to low amperage. It needs the higher amperage to run.

完成的

添加一条评论

添加你的答案

maciulex 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 6

过去 30 天: 20

总计 547