2 I have a P145 Keurig Office Pro Coffee maker. Reservoir problem.
Hello. I have a P145 Keurig Office Pro Coffee Maker. The part with a spring on it down in the bottom of the reservoir has come out. It comes out from the outside of the tank. Now it won't stay in the hole at the bottom of the reservoir. Is there something I'm missing?
Update (11/02/2022)
I'm made a mistake on the model number. It's a B145. I believe the part is called a spring loaded valve. I think it is where the water leaves the tank and goes into the brewer.
Here's is a picture looking from the outside from the bottom. I think this is where the spring-loaded part goes in. When you put the reservoir on the brewer it pushes the part up and the water can now enter the brewer.
Here is a side view screen shot of a video that shows how the part goes in the tank.
11 
5 
2条评论
I can't figure out how it stayed in there. I never saw any kind of adhesive residue on the part or tank after it came out.
由 Cori McCullough 完成的
i need to go to a store that sell Keurigs and look at the reservoir because this just isn't making any sense to me. I thought I was sure about how it went in. Now I'm getting confused about it. I'm typically thinking too much. I hope someone answers and tells me how it's suppose to go in and whether I need to start looking for a new tank. I did try calling Keurig yesterday and I got someone from the Philippines who couldn't help me. At all. I was a little disappointed to say the least.
由 Cori McCullough 完成的