Grey Screen Boot, Open Firmware

Question

PowerBook G4 Aluminum 12" 1-1.5 GHz

Model A1010 or A1104

99 个问题查看全部

joablen @joablen

声誉积分: 1

1

发帖于: 2012年1月2日

更多选项

Grey Screen Boot, Open Firmware

Hello,

A few years ago my powerbook g4's logic board fried and I kept it in a drawer until a few days ago when I bought a used 1.5Ghz Logic Board and replaced it. Now the computer will boot but I only get a grey screen. I've searched a lot around and the best I could find was this: http://hintsforums.macworld.com/showthre...

that guy has my same problem. It seem though that everything is working fine but I'm not getting anything on the display (except for grey). I can get into Open-Firmware but I'm typing blindly. Does anyone know why this happens and how to fix it?

I have tried

- Reset PRAM, NVRAM

- Won't seem to boot off a CD (with c held down)

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 -1

添加一条评论

2个答案

已选择的解决方案

rdklinc @rdklinc

声誉积分: 32.4千

RDKL, Inc.

207

156

62

发帖于: 2012年1月3日

更多选项

Verify that the Airport Extreme card is firmly seated. I've seen cases on the 12" PowerBook where if it's just slightly out of its socket, the machine will go into open firmware, or otherwise act strange.

Beyond that, is it a faint, sort of opaque grey screen, or a solid white screen? The odd-colored grey screen can be an indication that the inverter light is working, but the video signal is not coming across, in which case I'd make sure the video cable is firmly seated on the logic board side. I'd try booting in option mode, i.e. power on with the option key held down, and if you DON'T see the option menu, that generally means you have a video-related issue. You can also try the external monitor as Mayer suggests.

这个答案有帮助吗？

是否

得分 2

添加一条评论