跳转到主内容

2016年版Retina MacBook的更新版本。型号A1534,EMC 3099。现在采用更快的Kaby Lake处理器,最高可达1.4 GHz Core i7,支持Turbo Boost加速至3.6 GHz,SSD速度提升高达50%,并支持高达两倍的内存。

81 个问题 查看全部

MB 2017 won't turn on - how to diagnose before moving to logic board?

This 2017 MacBook Retina 12 inch is dead. Different chargers and cables don't make a difference. Resetting SMC with the left ctrl + left option + left shift + power for 10 seconds doesn't work. Holding down the power button for 10 seconds doesn't work.

I even gently lifted the logic board from the internal battery connector, held it in place with plastic spludgers, plugged the MacBook into a charging brick, and tried the key combinations above.

What else can I do before testing the logic board...which I haven't found any guides to do at the moment.

Can I test the USB-C port with a multimeter to check for connectivity?

Any advice that helps me diagnose this would be great!

Edit: I've attached a photo of the board.

Block Image

Block Image

回答此问题 我也有这个问题

这是一个好问题吗?

得分 5
添加一条评论

3个答案

最有帮助的答案

@fixwiki try this first and see what you can determine

Minimum Configuration

Putting the computer in a minimum configuration helps determine which part may be malfunctioning by reintroducing parts one at a time until the problem recurs. This procedure is useful when troubleshooting symptoms such as:

No power

Will not start up

Kernel panic

To troubleshoot the MacBook using the minimum configuration, remove or disconnect all parts except:

Logic board

I/O board and flex cable assembly

Audio board

Audio board flex cable

Speaker/antenna module (Early 2015 and 2016 only)

Power

5W power adapter (Do not use a higher wattage for minimum configuration.)

USB-C cable

Reinstall or reconnect remaining parts one at time until the issue is replicated.

I'd be checking the I/O board first since that would be the entry point for power.

Block Image

The LIO is what I was referring to

Block Image

Update 04/17/2022

this is F3500 and it's a fuse on the PPVBUS_LIO. See if you have power and /or continuity on it. If you do not then you know the issue originates on your LIO board. You do need a closer, clearer picture of your logic board to identify things . Also, consider checking the connector from the LIO on your logic board.

Block Image

这个答案有帮助吗?

得分 4

14条评论:

@oldturkey03 This is very helpful information. To know that if I connect the computer to its charger via USB-C, that the board should accept the electricity, which would enable the small light to illuminate when the gold button is depressed.

I've never once been able to get the small LED to light up. Does this indicate that electricity never gets to the Logic Board?

完成的

@fixwiki sure looks like it. If the LED does not come on you do not get power to the board.

完成的

@oldturkey03 So I could check for continuity on the USB-C port. Is there anything else I can check? You mentioned the I/O board.

完成的

@fixwiki yes you could. One of the things to check would be if you are you getting power from the LIO to the board?

完成的

@oldturkey03 Alright, so.... I'll need a multimeter to check , yes? I have 2-probe voltage tester that can go as low as 32V DC. 😁

完成的

显示更多的9条评论

添加一条评论

I have been very successful on this problem by just attaching a new battery. If it works, then I install the battery. most of the time I do not get the low battery icon on the screen before doing this.

这个答案有帮助吗?

得分 1

1条评论:

is posible to charge batery of MiniBook 2017 Retina using a HUB 4 with regular USB enter and mini exit USB 2 or 3 only to recharge the batery ? I find a new cable (chinese ) but don't work.

完成的

添加一条评论

If you want indepth help with board level issues, check out Louis Rossman's website that deals with it in more depth: https://repair.wiki/w/MacBook#12%22_Reti...)

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

FixWiki 将永远感激不已
浏览统计数据:

过去 24 小时: 1

过去 7 天: 6

过去 30 天: 25

总计 852