跳转到主内容

Xbox One controller introduced in 2016 with the launch of the Xbox One S and adds Bluetooth support for Windows 10. This controller fixes many of the design flaws found on Model 1537/1697 controllers and is much more reliable. This controller has been replaced with the Model 1914 controller.

136 个问题 查看全部

Solder pads came off! How do I fix this?

Was replacing the joystick when one of the at happened to come off! The pad is gone I cannot find it and I do not have a replacement or know what else to do!

If anyone knows how to fix this it would be extremely helpful!

Block Image

回答此问题 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

1个答案

最有帮助的答案

@rileylearns you’ll have to run some jumpers from the points marked by the arrow. Either short one from the Blue mark or long one from the Red marker. Remove the masking carefully with something like an Exacto knife or a scalpel from those points and then solder a jumper wire to it. You don’t have a lot of room for errors left so make sure that you get a good handle on it. Watch your heat and the time you expose your soldering iron to the pads (red rectangle looks like its ready to melt off). Looks like you are running really hot or long time.Your solder pads will melt off. Make sure that you use good flux and a decent soldering station with the right tip.

Block Image

这个答案有帮助吗?

得分 2
添加一条评论

添加你的答案

Justin 将永远感激不已
浏览统计数据:

过去 24 小时: 1

过去 7 天: 12

过去 30 天: 71

总计 617