Tv wont stay on and any button pressed on controller turns it off

Question

Panasonic Viera

Repair guides and support for Panasonic's Viera line of televisions.

417 个问题查看全部

Aysha Lawrence-taylor @ayshapoppy

声誉积分: 13

2

1

发帖于: 2020年9月19日

更多选项

Tv wont stay on and any button pressed on controller turns it off

My tv was working totally fine this morning and then it suddenly kept turning it’s self on and off. I unplugged it and cleaned out any dust etc, changed the controller batteries too. I have left it unplugged for a few hours and now when it turns on and I try to use the controller it will turn off as soon as any button is pressed.

Can anyone shed some light? This is the exact model I have: Panasonic TX-L42ET60B 42" Smart VIERA LED TV

回答此问题我也有这个问题

这是一个好问题吗？

是否

得分 1

1条评论

@ayshapoppy so the power turns on until "I try to use the controller it will turn off as soon as any button is pressed" it turns off? Your TV is a TX-L42ET60B?

由 oldturkey03 完成的 2020年9月19日

添加一条评论

1个答案

@ayshapoppy so the power turns on until "I try to use the controller it will turn off as soon as any button is pressed" it turns off? Your TV is a TX-L42ET60B? — oldturkey03

oldturkey03 @oldturkey03 声誉积分: 785千 1.1千 894 2.3千 · Answer 1 · 2020-09-19T12:49:24-07:00

最有帮助的答案

oldturkey03 @oldturkey03

声誉积分: 785千

1.1千

894

2.3千

发帖于: 2020年9月19日

更多选项

@ayshapoppy let’s start off with trying to do a reset. Unplug everything from the back of your TV. Unplug the TV. Press and hold in the on/off switch. Press and hold the red button on the handset for 30 seconds. This will reset the PANASONIC TV. ... Keep pressing the power button for another 60 seconds. After that connect only one input device. Something like a DVD player, BR player or even a game console. Then plug your TV in and try to start see if that changed anything.

这个答案有帮助吗？

是否

得分 2

17条评论:

I have already tried this! If i don't press any buttons on the controller it will also turn off within 30seconds-1min

由 Aysha Lawrence-taylor 完成的 2020年9月19日

Okay that sounds like either the power board or your TV turns itself off in protect mode. Do you get any blink code pattern from the power LED? Are you up for taking the back cover off and taking a look at the boards etc.?

由 oldturkey03 完成的 2020年9月19日

@oldturkey03 I'm pretty sure theres a blink code, it goes very quick haha. I could get someone to help me take the back off, I'm not very good with in depth tech stuff. The blink code is red and then green and they seem to go for the same amount of time. Would i need to count the blinks?

由 Aysha Lawrence-taylor 完成的 2020年9月19日

@ayshapoppy if you can count them that would be good. Panasonic uses blink codes to point out if there are any errors with the self check. You would also need a multimeter to do some testing. Once you got the back cover off post some good pictures of your boards with your QUESTION. That way we can see what you see. 在已经存在的问题里加入图片

由 oldturkey03 完成的 2020年9月19日

@oldturkey03 Just plugged it back in and only got green flashes, tried to count as best as i could and i think it's about 21. Very quick for about 17 and then slightly slower for the remaining 4.

由 Aysha Lawrence-taylor 完成的 2020年9月19日

显示更多的12条评论

添加一条评论

Panasonic Viera

Tv wont stay on and any button pressed on controller turns it off

1个答案

添加你的答案