bought the camera water damaged notice the only things not working are the flashtube and the lcd display took water damaged but only killed the backlight so I replaced it cant find signs of water damage elsewhere any ideas of what to replace next or where backlight is powered from etc?
声誉积分: 783.7千
1.1千
894
2.3千
@danield1497 since this is a water damaged camera it will most likely be an issue with the mother board. Check for any obvious components mossing or charred looking. There should at least be one fuse on the board. Check that one for continuity. Remove the motherboard and clean it with some +90% isopropyl alcohol and a soft brush. Yes, you can submerge it in alcohol to clean it. Post some good images of your motherboard so we can see what you see and possibly find the failed part.
指南
难度：
非常容易
—
2 - 5 minutes
指南
难度：
中等
—
15 - 30 minutes
这个答案有帮助吗？
过去 24 小时： 1
过去 7 天： 8
过去 30 天： 13
总计 195
1条评论
Camera functions as should just backlight and flash do not work I can shine a flashlight on the lcd and its on live view works just seems to be no power to backlight brightness is set to max
由 daniel durant 完成的