声誉积分: 23
1
Can I cut the ground wire for both sides where it has frayed and reconnect or do I need to replace the wire
it’s right before they connected all other wires with the black tubing it’s worn from use and also do I have to softer it? Can I tape it or a another way
声誉积分: 784.3千
1.1千
894
2.3千
@arobidoux sure you can. You did not tell us where it needs to be connected so we cannot provide you with more detail. Sometimes a picture is worth a thousand words 在已经存在的问题里加入图片
Alexarae Robidoux thank you for the images. You could cut the whole first couple inches of the wires. Then remove the insulation from the wire for a couple of inches and and resolder the new strands t the connectors. You may lose a few inches of the total length but at least you would know that the wiring is good. Apply either some shrink tubing or some liquid electrical tape after.
Yes, soldering is really the only way to make sure that the cables are completely connected and stay that way.
这个答案有帮助吗？
过去 24 小时： 0
过去 7 天： 3
过去 30 天： 20
总计 704
