跳转到主内容

Repair information for the Crusher Wireless headphones. Model number: S6CRW-K591. First available on Amazon in August of 2016.

24 个问题 查看全部

The turning mechanism between the earpad and the headband broke.

After almost one and half year my headphones just broke when I wanted to put them on. I was very surprised that this happened and I'm also very sad because I can't even wear them anymore. The sound and everything is just fine.

Block Image

Block Image

回答此问题 我也有这个问题

这是一个好问题吗?

得分 6
4条评论

Did you find a solution? I'm having the same problem and I'm looking for the replacement part to print it with the 3D print... But I can't find it...

完成的

I duct taped it together until I got back home. (I was on an international internship). Then my dad gave me money to buy a new one.

完成的

@Floortje B hahaha Ok thanks

完成的

ok so I need the part that's still connected to the earmuff... the plastic piece with the 2 screws on the bottom of the first picture

完成的

添加一条评论

3个答案

最有帮助的答案

Floortje B  the only way you can fix that is by either having someone 3D print you a new part for it or you’ll find another pair that is broken other than the hinge part. Looks like the 2 screws are the only thing that hold those to your headphone. Removing those most likely enables you to replace the broken part.

这个答案有帮助吗?

得分 2
添加一条评论

I figured out a temporary fix. I am posting this for others arriving here from search engines and the like. I assume OP's problem has long been solved. My fix is based on somebody else's fix.

I have 3D printed parts on the way, but my 'design' may actually press down on my ears better than the original. 🤔

What you'll need:

-Tie rip 2 mm
-Tie rip 4 mm
-Drill + 1,5 mm drillbit for metal
-Strong thin elastic.

-Pliers (for making sure the tierips are real tight.)

Block Image



Alt for picture: https://imgur.com/a/TcRGRT2

这个答案有帮助吗?

得分 1

2条评论:

Great quick fix! If you find the time, create a step by step guide for this!

完成的

@amber No time, this is what I got. It's pretty detailed already.

完成的

添加一条评论

My device is broken exactly at the same point today. I fix it by drill a hole from one site to the other (1,2mm thick) and insert a steel pin (as it is used in watches). I used black tape to prevent fall out of the pin.

If anybody is 3D-printing original part, I would like to order one!

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

Floortje B 将永远感激不已
浏览统计数据:

过去 24 小时: 3

过去 7 天: 7

过去 30 天: 26

总计 1,546