This device won't take a charge, I've put a different battery in it, and charged the other battery in a different unit and the battery is just fine.
I've tried different chargers, both of the two different styles that I'm aware of, but still no success.
声誉积分: 783.7千
1.1千
894
2.3千
@cando_it so if the battery works and holds a charge and if the power supply works properly then you need to check the power supply connector. Measure the contacts in the back of the connector with the charger plugged in. It is either the port or the charging circuitry on the board. Schematics are pretty much non-existent so you will have to do a bit of investigating.
这个答案有帮助吗？
What part of the power connector do I put the multimeter on, and possibly the settings for the meter
should be the left and right outer contacts of the port
过去 24 小时： 1
过去 7 天： 4
过去 30 天： 5
总计 129
