跳转到主内容

A series of 40 inch LCD HDTVs by Sony.

193 个问题 查看全部

No picture, no sound, no blinking lights on Sony KDL-40W600B

Cannot turn on with remote or button on TV. Unplugged power brick, waited overnight. Applied power again. Got a brief Sony logo on screen, then it went dark. I have repeated the power disconnect/reconnect several times. Results always the same. No picture (other than the Sony splash screen), no sound and no blinking lights of any kind. I notice that after the splash screen the display has a very dark purple-ish tint until I remove power. Is this a bad board? Any help with which one, if that is the problem? Thanks in advance!

Block Image

Block Image

Block Image

回答此问题 我也有这个问题

这是一个好问题吗?

得分 1
添加一条评论

3个答案

最有帮助的答案

@jazzbo "this “after the splash screen the display has a very dark purple-ish tint “ is most likely your backlight being on. This could very well be a mainboard issue. Post some pictures of your boards with your question so we can see what you see. 在已经存在的问题里加入图片

Make sure you have a multimeter so we can check a few things

这个答案有帮助吗?

得分 3

1条评论:

oldturkey03, thanks for the fast response. I’ve added pictures of the 3 boards.

完成的

添加一条评论

Hi @jazzbo ,

Since you get the splash screen and the unit stays powered on, I'm wondering if it is a software problem rather than a hardware problem. Which would also be on the mainboard where the problem may be as suggested by @oldturkey03

Here's a link showing how to update the firmware in your model TV.

I don't know if it will work if your TV's firmware is a later version or not.

You can contemplate attempting this as a last resort if all else fails to resolve the problem

这个答案有帮助吗?

得分 2

1条评论:

Thanks @jayeff. If all else fails I'll give this a go.

完成的

添加一条评论

It sounds like you have a faulty LD BOARD. Replace it you are good to go. just for emphasis it is the second picture you uploaded.

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

R Foster 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 5

过去 30 天: 12

总计 664