"Washed out" display with narrow more colorful band around edge

Question

Samsung LN46A530P1FXZA 46 inch LCD TV

The LN46A530 has a 46" display, combined with SRS TruSurround XT. The PC input allows this display to double as a 46" computer monitor

71 个问题查看全部

JCE138 @jce138

声誉积分: 73

4

3

发帖于: 2019年6月13日

更多选项

"Washed out" display with narrow more colorful band around edge

My model is slightly different: LN46B530P7NXZA but apparently from the same family.

Friend gave me the tv saying it had sound but no picture.

On testing, noted that backlight was fine and that picture was just washed out.

Fiddled for a while with the picture settings such as the brightness and contrast and at some point everything just returned to normal.

After a couple days, the picture quality gradually deteriorated firstly by ghosting then gradually “grayed”out back to the original condition I received the TV.

I opened the unit and everything seems fine visually.

Downloaded the service manual for the related model on IFIXIT which seems to point to the T-CON Board.

Disconnecting and reseating the ribbon cables to the T-CON board did not resolve the problem.

Should I replace the T-CON board or does anyone thing the problem lies elsewhere?

I am especially minded to the earlier recovery during changing the settings.

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 2

添加一条评论

3个答案

已选择的解决方案

oldturkey03 @oldturkey03

声誉积分: 781.6千

1.1千

893

2.3千

发帖于: 2019年6月15日

更多选项

JCE138 this does not look like a typical T-con issue at all, but it is possible that this is related to a bad Gamma correction IC. Some TV’s do have those on the T-con board. At this point you can try and see if replacing the T-con board will fix it. This T-con board apparently has issues with the Gamma Correction IC and replacement IC’s etc. are being sold separately. The board is a Samsung 35-D025860 Post some good pictures of your boards with your question so that we can see what you see. 在已经存在的问题里加入图片

The IC in question is labelled AS19-H1G and here is the datasheet for it AS19-H1G datasheet. This will allow you to check the voltages etc.

这个答案有帮助吗？

是否

得分 1

4条评论:

Thanks for your comments.

I ordered a T-con board and will post the results of the swap when I get it.

Do you know of any cases of “recovery “ even temporary, when the T-con goes bad?

由 JCE138 完成的 2019年6月15日

Nope not really for the complete t-con but if it is the IC then it is possible. We would need to find a schematic for your model t-con board to see if the chip is even on it. Post a good picture of it

由 oldturkey03 完成的 2019年6月15日

The t-con board has the following numbers on it

V520H1-C06

M$35-D025860

Hope this helps in the search for the schematic.

由 JCE138 完成的 2019年6月16日

If you want to check if that is the error get a can of freeze spray and cool the IC down. If that changes the image you pretty much have your answer;-)

由 oldturkey03 完成的 2019年6月16日

添加一条评论

Thanks for your comments.

I ordered a T-con board and will post the results of the swap when I get it.

Do you know of any cases of “recovery “ even temporary, when the T-con goes bad? — JCE138
Nope not really for the complete t-con but if it is the IC then it is possible. We would need to find a schematic for your model t-con board to see if the chip is even on it. Post a good picture of it — oldturkey03
The t-con board has the following numbers on it

V520H1-C06

M$35-D025860

Hope this helps in the search for the schematic. — JCE138
If you want to check if that is the error get a can of freeze spray and cool the IC down. If that changes the image you pretty much have your answer;-) — oldturkey03

JCE138 @jce138 声誉积分: 73 4 3 · Answer 1 · 2019-06-22T17:16:17-07:00

JCE138 @jce138

声誉积分: 73

4

3

发帖于: 2019年6月22日

更多选项

The unit seems fine after changing the t-con board

Thanks to @oldturkey03 for his observations and advice.

这个答案有帮助吗？

是否

得分 0

1条评论:

JCE138 looks good. Great job fixing your TV!

由 oldturkey03 完成的 2019年6月22日

添加一条评论

Dev Kumar @philtulju 声誉积分: 1 1 · Answer 2 · 2021-08-30T08:24:08-07:00

Dev Kumar @philtulju

声誉积分: 1

1

发帖于: 2021年8月30日

更多选项

I also had this issue on my Samsung TV - intermittently the whole image was washed out and milky. Replaced the T-con board but I suspect just replacing the one IC would have worked as well - it was clear that the refurbished board I bought had only had that one IC replaced.

这个答案有帮助吗？

是否

得分 0

添加一条评论

Samsung LN46A530P1FXZA 46 inch LCD TV

"Washed out" display with narrow more colorful band around edge

3个答案

Update (06/16/2019)

添加你的答案