声誉积分: 1
2
I made a big mistake: I took apart my Samsung ML-2010 Laser Printer because the spongy roller had to be repaced and I didn’t know that the sponge material snaps out without tearing down the whole thing.
Now that I’ve reassembled, some gears have flat ends on them, kind of like a letter D and I can’t figure out how to align the gears so that it will advance the paper sheets correctly.
声誉积分: 783.8千
1.1千
894
2.3千
@drhoo printer repair is a royal PITA because manuals are scarce and repair parts are hard to come by. Nobody wants to repair a printer since it is cheaper to buy a new one. Anyhow, you did not tell us which exact gears etc. It will help if you add lots of images etc. Whenever you run into issues like this. Here is a document that will be of interest to you. If nothing else it’s a start. Samsung-ML-2010.pdf
Here is a guide that will tell you how to post some images of what you are looking at 在已经存在的问题里加入图片
这个答案有帮助吗？
Ok, I'll tear it down again and post photos, that is a valid point. Thank you!
@drhoo Checked the document to see if it shows what you are looking for?
Nothing in there about it.
I got the rest of it as well just need to know where your gears are etc.
过去 24 小时： 1
过去 7 天： 3
过去 30 天： 6
总计 129
2条评论
Does nobody here ever do laser printer repair, are there ANY tips?
由 Marco 完成的
Gee, no responses, surely people have fixed laser printers before and have tips? The gears are in good condition, I just need to figure out how to align the teethless part of two of the gears. Is there no one willing to engage on this?
由 Marco 完成的