How do I replace the CPU tapes on the MacBook Pro?

Question

MacBook Pro 15" 配备 Retina 显示屏 2015 年中版

2.2 GHz (Turbo Boost 最高可达 3.4GHz), 2.5 GHz (Turbo Boost 最高可达 3.7GHz), 或者 2.8 GHz (Turbo Boost 最高可达 4.0GHz) 四核 Intel Core i7 处理器，配备 6MB 共享三级缓存。

773 个问题查看全部

dino @guying

声誉积分: 1

发帖于: 2019年1月17日

更多选项

How do I replace the CPU tapes on the MacBook Pro?

I have a 15” Apple MacBook Pro from 2015 with ForceTouch Trackpad. I was changing the thermal paste for the CPU and I ended removing the black tape that’s around the side of the CPU. The black tape was covering some CPU components.

It looks like I need to replace it, but with what? Should I use the typical black electric tape or use something else?

I’m in the UK, so if you have suggestions, please let me know.

Here is a picture to so you guys can see what I mean by the black tape.

回答此问题我也有这个问题

这是一个好问题吗？

是否

得分 0

添加一条评论

4个答案

score 2 · Answer 1 · 2019-01-18T08:17:58-07:00

最有帮助的答案

mayer @mayer

声誉积分: 685.3千

MacHale Enterprises

3.4千

1.1千

2.6千

发帖于: 2019年1月18日

更多选项

I’m looking at step#9 of the heat sink replacement guide and don’t see any tape. Would you post a photo of what you are seeing.

替换MacBook Pro 15" Retina 显示器2015年中期版本散热铁

这个答案有帮助吗？

是否

得分 2

添加一条评论

Ben @benjamen50 声誉积分: 159.7千 Mtwo Perform 11 191 368 · Answer 2 · 2019-01-17T21:21:36-07:00

Ben @benjamen50

声誉积分: 159.7千

Mtwo Perform

11

191

368

发帖于: 2019年1月17日

更多选项

You can use the yellow kapton tape in place instead of the usual black plastic tape they put on there.

这个答案有帮助吗？

是否

得分 0

添加一条评论

dino @guying 声誉积分: 1 · Answer 3 · 2019-01-18T09:44:40-07:00

dino @guying

声誉积分: 1

发帖于: 2019年1月18日

更多选项

Thank for you reply, guys. @mayer I’m talking about the black tape around the CPU. From the photo you attached, there is thermal paste on the reflective part, which is the main CPU and iGPU, the rest is black tape that is stuck on around the chip to protect the other chip components. I highlighted into this photo to show you what you mean.

I also attached another photo of the stock 4770HQ without the black masking tape, and I drew on it to show you what it looks like with the masking tape.

这个答案有帮助吗？

是否

得分 0

3条评论:

OK. i just have never taken that tape off. It's probably there to prevent excess thermal paste from getting on other components. Ben is probably correct in using Kapton for replacement.

由 mayer 完成的 2019年1月18日

Cool Thank you! Also, thank you for taking the time to reply and help me out. It means a lot! :D

由 dino 完成的 2019年1月18日

What did you end up doing as your final solution? I’m planning on using a tape like Kapton tape to cover the other components

由 Evan Plett 完成的 2019年2月21日

添加一条评论