声誉积分: 151
4
6
I recently flashed my razr v3 and now it doesn't charge it says unable to charge. It still works when its plugged in but when I unplug it it turns off. Not sure if it's the batterys fault or the phone's.
Edit: The battery outputs 1.91v on the 2 outside terminals and the 2 inside ones output 0.02v. the phone outputs 2.10v. It still wont charge
声誉积分: 781.6千
1.1千
893
2.3千
Panayiotis Michalos this “The battery outputs 1.91v on the 2 outside terminals and the 2 inside ones output 0.02v. the phone outputs 2.10v.” sounds like your battery is discharged below the threshold of taking a new charge. Start off by replacing the battery and then re-evaluate. If nothing else it will give you a known-well starting point should further troubleshooting become necessary.
这个答案有帮助吗？
过去 24 小时： 1
过去 7 天： 9
过去 30 天： 26
总计 2,767
1条评论
could I directly put 3.7 volts to the 2 inside battery leads or will it explode?
由 Panayiotis Michalos 完成的