修复你的物品 社区 商店

Model A1286. Released February 2011 / 2.0, 2.2, or 2.3 GHz Quad-core Intel Core i7 Processor

586 个问题 查看全部

更多选项

LCD burnout sign after kept for a few months MBP early 2011

Block Image

I had a MBP 15” early2011 with a failed GPU just this year and I kept the MBP in the drawer for 2mth,

recently I read on ifix it about there a step to disable the gpu and force to run on the intel building display and once I try to power up the MBP and notice this happen the display turned into such smear pattern and it’s inside the LCD not outside.

Anyone happen to have such issue before? And any solution on this? If the display can be save I might get a 2012 mid logic board and replace the defect 2011 early board.

已回答！ 显示答案 我也有这个问题

这是一个好问题吗？

是 否
得分 0
2条评论

ngwenyuann post some pictures of what yuor screen shows with your question. 在已经存在的问题里加入图片

Also, did you try an external monitor to see what it displays?

由完成的

I notice the burnout mark on the mbp LCD only. My mbp had a failed gpu I got blue screen with stripe after the gray screen. But the burnout mark remain even during blue screen. This happen after I keep the mbp under my drawer for 2mth since the gpu failed.

由完成的

添加一条评论

1个答案

筛选条件:
最有帮助的 最新 最老的
已选择的解决方案

更多选项

ngwenyuann those do not look like any kind of burn in. Those look like pressure marks. I would suggest to try and disassemble the actual panel and see if you can make out any damage to the diffuser sheets. If you can’t then I suggest a different display.MacBook Pro 15" Unibody Early 2011 Display Replacement

这个答案有帮助吗？

是 否
得分 1

2条评论:

Thanks for the information. It cost too much to replace the display and a logic board together. I just doesn’t understand why there are pressure mark on the display as I never place anything on the lid and I’ve check the lid doesn’t have any dent also. But anyway it’s pity to see it goes.

由完成的

Hi have same issue pressure mark any remedy have found

由完成的

添加一条评论

添加你的答案

ngwenyuann 将永远感激不已
浏览统计数据:

过去 24 小时： 0

过去 7 天： 2

过去 30 天： 5

总计 176