更多选项

shown the red led when plugged in to power, but nothing on the screen.

Mine wouldn't even come on, it shown the red led when plugged in to power, but no sign of anything on the screen. I replaced main board, now it blinks a few times and you can see that the led it lit but no picture or info when I press menu/input ect. What should I try now?

. My board

Yes same model Sanyo fw65d25t, I changed out the main board and then the t-con board to. Still no menu/input menus pop up or picture. Before it wouldn't even come on if I hit power, the led would just stay lit, now it just blinks a few times and lights up the background.

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 0

1条评论

@thud84

any chance to get an image of the power board?

由 oldturkey03 完成的 2018年9月26日

添加一条评论

发帖于: 2018年9月26日

更多选项

@thud84

it is entirely possible that this is caused by a bad power supply. Your main board may not get the power etc. it needs. Since you already changed the main board and the t-con board (assuming that both boards are good boards) then the next thing would be the power board. Yes, it gets the backlight enable and turns the backlight on (signal coming from the main board) but may not supply the main board as needed. Masure teh voltages on CN1 and let us know what you find. Those are DC voltages. Black probe to ground and measure with red probe on contacts.

这个答案有帮助吗？

是否

得分 2

2条评论:

Is that the power cord? Bc I only see two boards , and the main board is where the power cord end plugs into

由 Thud84 完成的 2018年9月26日

@thud84 your Sanyo is a fw65d25t correct? The power board etc. and schematic that I have for that model is identical to these https://www.shopjimmy.com/sanyo/fw65d25t

由 oldturkey03 完成的 2018年9月27日

添加一条评论

Sanyo Television

shown the red led when plugged in to power, but nothing on the screen.

Update (09/26/2018)

Update (09/26/2018)

1个答案

添加你的答案