Step-by-step guides for canister, robotic, and upright vacuum cleaner repair.

587 个问题 查看全部

brushes on brush bar do not spin

I have a Hoover steam cleaner F7426-900. This is a fine steam cleaner, but the brushes have stopped turning. Is there a belt inside the cleaner that spins the belts? How can I get to it. Also, the little 'gripper' on the brush bar appears to be stripped, and one little piece of it looks like it's down inside the 'turner'.

已回答! View the answer 我也有这个问题


按维修分数 0

所有超过US$100或包含 Pro Tech工具包的订单免费送货!




suedumm, it appears as if your steam cleaner uses a turbine wheel to drive the brushes. So it is possible that reason the brushes are not spinning because the turbine gear assembly failed, or is clogged with debris Check on this link to find the exploded drawing for the proper part as well as how it is put together. It is not a service manual but should most certainly help you to disassemble it. Here are also a few pictures for the same problem and Here are same good direction how to clean your brush filter. Good Luck.


按维修分数 1


suedumm 将永远感激不已

过去的24小时: 8

过去的7天: 45

过去的30天: 232

总计 13,156