跳转到主内容

The Xbox 7MN-0001 Wireless Controller, was manufactured by Microsoft Corporation. It is the first generation Xbox One controller released, but has since been discontinued. This controller has since been superseded by Models 1697/1698 and Model 1708. While this controller is commonly used with the Xbox One, it can also be used for PC gaming.

127 个问题 查看全部

Stick drift persists after adjusting the sticks

Hey guys! I've been having bad upwards stickdrift on my right stick, so I took it apart and adjusted it to nearly completely remove it. It was fine. A bit of tiny downwards drift, but barely noticeable. Not long after, the drift has returned. I going to have to rip it apart and asjust sever times a day, or am I just doing it wrong?

回答此问题 我也有这个问题

这是一个好问题吗?

得分 0
2条评论

Which model is it?

完成的

Sorry, I should have specified. 1708. The white one.

完成的

添加一条评论

3个答案

最有帮助的答案

You can try cleaning the stick with 99.5% isopropyl alcohol, this has helped me with the same issue in the past, just dab it in with a Q-tip, and clean.

这个答案有帮助吗?

得分 1

5条评论:

That was the first thing I tried. Before I tore it completely apart to adjust it.

I'm also getting double inputs on YouTube and Xbox dashboard of that helps.

完成的

Hm. Hard to tell, with the double inputs, did you by chance get the controller wet? or spill anything on it?

完成的

No, not that I know of. The double inputs seem to be linked to the control stick though. Whenever I adjust it to remove the drift, the double inputs go away, but they return as soon as the drift does

完成的

Could it be the sensor that I've been adjusting? If I put a new one in there, might it work normally?

完成的

A new sensor might fix the issue, however, be careful with the soldering. If there is damage to the logic board of the controller, it will persist.

完成的

添加一条评论

The way plenty of people fix stick drift (including myself) includes the following.

  • Cotton Bud
  • Rubbing Alcohol
  • Controller
  • Wet the cotton bud w/ the RA then tighten it up/ squeeze the end, reapply RA then rub it all around the joystick as hard as possible

这个答案有帮助吗?

得分 0

1条评论:

what the heck is a RA?

完成的

添加一条评论

I just fixed this on my elite controller and the way i fixed it was by separating the up and down green piece a little. Hard to explain but after you get your controller apart there are 2 green pieces. One for up and down the other for left and right. My conclusions is that the piece is worn out so it's loose. Separate the green piece on the right just a little bit so the black prong on the side go in a little. This worked for me and nobody told me about it

这个答案有帮助吗?

得分 0

1条评论:

Can you use the lens cleaning wipes because it says it contains isopropyl alcohol so can I use that

完成的

添加一条评论

添加你的答案

Mark Whittaker 将永远感激不已
浏览统计数据:

过去 24 小时: 2

过去 7 天: 6

过去 30 天: 21

总计 7,185