跳转到主内容

修复你的物品

维修的权力

商店

High performance tablet computer released by Apple on November 11, 2015. Model A1584.

115 个问题 查看全部

Not charging / dead issue

Hello,

Recently had an iPad pro 12.9 in for repair.

Device is dead customer explained before the device was dead it was stuck at one percent showing charging but not increasing in charge.

Device was completely un-tampered with so that ruled out any issues during a previous repair.

We have tried all the easy options (battery charge port) still no luck!

Today we set about replacing the charge IC (something we do commonly) but still no Joy device powered back up at 1% but still wont charge! Very frustrating!!!

Any ideas?

Thanks in advance!

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 2

评论:

Did you try using a different charger? lol

完成的

Hey i'm having EXACTLY the same problem(& i'm pretty !#^&@@ off too).. @TechnicalDifficulties, personally yes i've tried all the common variables .. Hopefully someone here has a solution, plz?

完成的

Hello,

The trouble I had with this was there is no schematics!

I Finally tracked it down to a faulty filter near to tristar.

Recommend probing around that area and hopefully that helps!

Hope this helps...

完成的

I have the same problem. First repair shop couldn't repair it. Apple warranty has expired. Any idea where I can take it for repair? Thanks.

完成的

添加一条评论

4个回答

已选择的解决方案

If you replaced Tristar and are confident that it was a successful replacement (and a good part!), then the other possibility is the PMIC and associated circuit that has to drive the current. Unfortunately, there is no schematic available so it's hard for me to reference anything for you.

You will either have to probe until you find it (check the coils to see if they are solidly anchored) or outsource it to someone who already has a lot of experience on those devices.

这个答案有帮助吗?

得分 3
添加一条评论

This may sound too simple, but it worked. I have an ipad 12.9 gen 3. It refused to start and would not charge. If I plugged in a charger, the screen would display a battery with one thin red line. No matter how longer I left the unit on the charger, there was no joy. The local Apple store declared it dead and wouldn’t touch it. Then I took it to a local UbreakIfix and they suggested replacing the battery, They discovered, however, parts for a third generation ipads were impossible to get. Yet, when I went to pick up the unit, they had it working. How? They used a 24 Watt charger (Samsung) to wake the battery up. The battery had been left to totally discharge a few times. Apparently, the charging circuit will not charge a fully depleted battery. This answer may not work for everyone, but it worked for me.

这个答案有帮助吗?

得分 1

评论:

tried this and it worked for me. thanks for the tip!

完成的

添加一条评论

We had the same issue and tried to repair it ourselves…Does anyone know where I can get a 1st Generation iPad pro 12.9 A1652 WiFi and Cellular logic board?

这个答案有帮助吗?

得分 0
添加一条评论

Used a non-apple charger after waiting overnight on its apple branded one unsuccessfully,

Within a minute the apple logo popped up and it booted.

Still 1% charge, but began charging,

Had same issue as Brian above - thin red charge indication on battery logo, and no results with apple charger,

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

Robert Allport 将永远感激不已
浏览统计数据:

过去的24小时: 9

过去的7天: 33

过去的30天: 101

总计 5,199