声誉积分: 155
4
6
Hey I just replaced both the LCD and touch digitizer on an iPad mini 2 WiFi, and the touch won’t work. The LCD screen and the home button works completely fine but the touch screen won’t to anything at all and is completely unresponsive.
Here are pictures of everything:
声誉积分: 36.5千
10
25
46
it looks like you have ripped a pin from the board connection, from the photo, bottom row near the centre
这个答案有帮助吗？
声誉积分: 839.3千
1.3千
944
2.4千
Logan Davis like daniel already mentioned, you seem to have broken a pin. Well, actually it looks like you have broken a few.
Check the logic board connector and see if those are really broken. If so you will need the service of a microsolderer to repair this by replacing the connector.
这个答案有帮助吗？
That digi connector is really crap and breaks pretty regularly. It can be replaced by a micro-solderer.
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 2
总计 97
