修复你的物品 社区 商店

2015年3月更新的 13 英寸 MacBook Pro 配备 Retina 显示屏，型号为A1502，采用第五代英特尔酷睿 i5 和 i7 处理器，并配备 Force Touch触控板。

1185 个问题 查看全部

更多选项

No power, no magsafe lights. Resistor 470 looks blown.

Thanks for reading this post. I'm working with a 2015 rMBP 13" that has no power to the logic board and no magsafe light. I've already confirmed the DC-in board is good as it tested fine on another unit. LB has already been ultrasoniced.

It seems resistor "470" was blown as well as "100" above it. I replaced both and gave it a try and 470 blew again.

Does anyone know what would cause this and where else to look and what else to try? Appreciate all the help and I've learned a great deal from this site already.

Update (11/25/2017)

Block Image

Here's an image I found, it doesnt show them blown but you can see about the two I'm talking about.

已回答！ 显示答案 我也有这个问题

这是一个好问题吗？

是 否
得分 0
添加一条评论

2个答案

筛选条件:
最有帮助的 最新 最老的
已选择的解决方案

更多选项

Just a quick update/answer on this. I ended up sending this to a "more knowledgable" repair company and they sent it back as a no fix saying the CPU was shorted. Not sure how that made any sense so I decided to try to tackle it myself.

Measured voltage after R7020 after I replaced the 3 caps on the PPDCIN_G3 rail and it was jumping quite a bit (anywhere from 16-19v). No magsafe light. After testing the magsafe voltage to make sure it wasn't an adapter issue I decided to replace ISL U7100 (the charging IC). That did the trick and it seems to be fully functional.

这个答案有帮助吗？

是 否
得分 0

1条评论:

Guys you really good and you do your research so well , you make us enjoy electronics @Reece @Bkoosy @reecee @ all technicians # one family

由完成的

添加一条评论
最有帮助的答案

更多选项

@bkoosy this is not to diagnose your logic board but to identify the components you inquired about. The part with the marking 470 is reference designator R7020. It is a 47ohm 1% 1/3Watt resistor in a 805 package. The component with the "100"marking is reference designator R7005. That is a 10ohm 5% 1/8Watt resistor in a 805 package. Both components are part of your DC-in and battery connector circuitry. R7020 is part of the PPDCIN_G3 rail so you would have to test the components along that rail to see why and where it shortens out. You will need to obtain the schematic and boardview for the 820-3536 logic board in order to check those rails.

Block Image

这个答案有帮助吗？

是 否
得分 3

6条评论:

Thanks a lot for the info on those. I guess the next step is learning how to read schematics but thought maybe someone would have a hunch of what it might be if it’s a common problem.

由完成的

@bkoosy to many components and nothing obvious will require you to check what causes this. Board level repair will require you to learn schematics and to have access to them. If it would be easy then anybody would do it and Apple could not poke us in the eye anymore ;-). Of course experts like @reecee or @tcrs_circuit may provide you with some better information

由完成的

Agreed! After you pointed me in the right direction with part numbers I found a Rossman video with a similar problem. Will do my best to pinpoint it. https://youtu.be/A1l5D1annas

由完成的

As @oldturkey03 says, there will be a component on this line shorting to ground, causing the resistor to blow (or you are replacing it with the incorrect component).

Check for a short on this line, then use schematics and boardview to find the culprit with a path to ground

由完成的

Tanks for the advice @reecee

由完成的

显示更多的1条评论

添加一条评论

添加你的答案

Ben K 将永远感激不已
浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 7

总计 1,649