跳转到主内容

修复你的物品

维修的权力

商店

Model A1312 / Mid 2011 / 2.7 & 3.1 GHz Core i5 or 3.4 GHz Core i7 Processor, ID iMac12,2

689 个问题 查看全部

2011 iMac Black Screen but it everything else is fine

Hi Everyone!

I've opened my iMac to replace a bad HD but I left my LCD slipped from my hand damaging the V-Sync cable and the Flat cable. Now, my screen is black, I can see the desktop all over the LCD with an flashlight and I can use the iMac with a external display.

Checking the connectors, the V-sync just ripped the ground connector (both sides with weld) from PBC. The flat cable connector on the logic boards is fine but the cable was damaged, and I've tried to recover it. The # 4 led is turned off.

Does the flat cable affect the screen to put everything black (back light I supose)?

Sorry for my bad english and thanks for help!

PCB connector

Block Image

Damaged

Block Image

Recovered

Block Image

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 1
添加一条评论

2个回答

已选择的解决方案

@arkcyd yes it absolutely does. You will have to replace the connector in order to fix the iMac. The soldering will require good tools and practice to resolder. If you have not done this before I'd suggest you send it off to get it repaired. The best soldering technique used to resolder this would be drag solder. Stay away from hot air rework stations on this type of repair since even covering the connector with Kapton tape, chances of melting the plastic is extremely high. The connector itself is a I-PEX CABLINE-CA connector and available at places like Mouser.com Digikey.com and even Ebay.com.

这个答案有帮助吗?

得分 4

评论:

Hey @oldturkey03, thanks for the reply! I think that the Logic board connector is fine, maybe the problem is the flat cable. As you said that he also controls the LCD backlight, maybe the best thing to do is replace the cable first? What do you think?

Thanks!

完成的

@arkcyd yes you are right. Start with the easier part first and replace the cable. If nothing else it will give you a known-good starting point should further troubleshooting become necessary.

完成的

@oldturkey03 It works replacing the flat cable! Thanks a lot!

完成的

@arkcyd excellent! Great fix, good job! BTW welcome to iFixit.

完成的

@oldturkey03 Thanks!!! :D

完成的

显示更多的1条评论

添加一条评论

Saved my nappy ass. I though the video card was bad so I swapped screens but had the “black screen”. What I didn’t swap (until reading the answer here) was the flat cable. Once I did that, all was well. Thank you!

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

arkcyd 将永远感激不已
浏览统计数据:

过去的24小时: 0

过去的7天: 6

过去的30天: 16

总计 962