修复你的物品 社区 商店

Apple Time Capsule无线网络设备的维修和拆卸指南。

151 个问题 查看全部

更多选项

What adhesive do I use on the rubber cover?

I followed all of the steps to replace the hard drive and everything worked out great. However the rubber cover on the bottom does not want to stick back all of that well. Following the guide I was able to peel back the the cover to just where the screws are located and never removed the entire cover.

I was wondering what others had used, double stick tape does not seem sticky enough to me. I have tried using a hair dryer on a low to medium setting and it did fairly well.

已回答！ 显示答案 我也有这个问题

这是一个好问题吗？

是 否
得分 1
添加一条评论

3个答案

筛选条件:
最有帮助的 最新 最老的
已选择的解决方案

更多选项

I'd say rubber cement would probably be a good choice, as it is only semi-permanent but still holds well. Remove the old adhesive to make the surfaces as smooth as you can and then paint a thin coating of rubber cement on the inner side of the cover as well as the face of the case that it mates to. Let the rubber cement dry for a while, then press the pieces together. Just make sure you get it aligned the first time, it produces a surprisingly strong bond.

这个答案有帮助吗？

是 否
得分 5

4条评论:

+ works for me

由完成的

+ and me as well

由完成的

Thanks I will try that. I wonder if that is what Apple used in the first place as it was really stuck on when i tried to remove it.

由完成的

I've always wondered what the Apple OEM adhesive is as well. It seems like they use the same semi-permanent adhesive somewhere on nearly every device that they manufacture.

由完成的

添加一条评论

更多选项

You should try this

http://www.gorillaglue.com/glues/supergl...

or this

http://www.supergluecorp.com/super-glue/...

in my experience rubber cement never works on plastic.

这个答案有帮助吗？

是 否
得分 0

2条评论:

The time capsule has a rubber bottom cover that mates up to a steel plate, so rubber cement should be OK for this application. I'd be leery to use super glue for this because it produces such a permanent bond that you'd be screwed if you had to take the device apart again in the future.

由完成的

the only thing I use super glue for is to repair skin lacerations. It's a PITA if you ever have to replace anything again. Just my 2 cents

由完成的

添加一条评论

更多选项

Don't glue it back on. It's part of the problem.

Reassemble the Time Capsule with holes in the rubber and metal base for ventilation. Drill holes through them before reassembly. Double sided tape works good enough to hold the rubber on and allows easy removal if it needs to be opened again for HDD access.

这个答案有帮助吗？

是 否
得分 0
添加一条评论

添加你的答案

Jhan Jensen 将永远感激不已
浏览统计数据:

过去 24 小时： 0

过去 7 天： 5

过去 30 天： 19

总计 5,352