AR drone 2.0 board to board connector - need to solder it back

Question

Parrot AR.Drone 2.0

Version 2 of Parrot's toy quadcopter with HD camera, controlled over Wifi by smartphone.

24 个问题查看全部

Tomasz Lewicki @tomek_l

声誉积分: 1

发帖于: 2017年9月16日

更多选项

AR drone 2.0 board to board connector - need to solder it back

Hey,

So today I flew my ar.drone 2.0 around and had a crash.

After the crash I got "PIC watchdog emergency" notification on the screen.

Disassembled the thing and noticed that the board-to-board connector partly chipped off the PCB taking some of the solder pads with it.

Has anyone had similar issue or experience with fixing the ar drone 2.0 PCB?

Are there any PCB schematics on the Internet? I didn't have luck with finding any.

Thanks in advance!

回答此问题我也有这个问题

这是一个好问题吗？

是否

得分 0

添加一条评论

1个答案

oldturkey03 @oldturkey03 声誉积分: 784.3千 1.1千 894 2.3千 · Answer 1 · 2017-09-16T07:04:08-07:00

最有帮助的答案

oldturkey03 @oldturkey03

声誉积分: 784.3千

1.1千

894

2.3千

发帖于: 2017年9月16日

更多选项

@tomek_l there are no schematics of it yet. It is extremely difficult to find anything repair related on any drone. In your case I'd suggest you contact a good microsoldering business (this will depend on where you live etc.) and have them take a look at it. Sometimes traces can be rebuild and the experts can almost always come up with a fix. It might also help if you post some images of your damage with your question. For that use this guide 在已经存在的问题里加入图片

这个答案有帮助吗？

是否

得分 1

添加一条评论

Parrot AR.Drone 2.0

AR drone 2.0 board to board connector - need to solder it back

1个答案

添加你的答案