修复你的物品 社区 商店

2.26 or 2.4 GHz / White plastic unibody enclosure

645 个问题 查看全部

更多选项

Blank screen with brightness control, no image

Hi there, I've got a problem with my old, but well treated, Macbook mid 2010 A1342.

So, I had to change the top case, keyboard issues, but everything went well I followed the guide carefully but once everything was mounted I have now a blank screen with no image at all, external monitors and tv's are juste fine, I have brightness controls working but no image. I toke out the HDD reinstalled the OS and nothing, reseting PRAM, and all of the resets possible, nothing works, I tested with other display, same model, and it's the same. Did I "screw" up the logic board?!

I appreciate every kind of comment.

many thanks

I can ad photos if needed.

已回答！ 显示答案 我也有这个问题

这是一个好问题吗？

是 否
得分 0
添加一条评论

2个答案

筛选条件:
最有帮助的 最新 最老的
已选择的解决方案

更多选项

If it's driving the external monitor the logic board should be fine. I'd reseat the LDVS cable:

MacBook Unibody Model A1342 Display Data/Camera Cable Replacement

这个答案有帮助吗？

是 否
得分 2

8条评论:

Many thanks for your kind answer, before I try this, I would like to say again that I've tried with other A1342 display and I just got the same problem.

A blank screen and external monitor working. If I cringe a bit the display I can see some stripes (left side and right side)

I took some photos:

http://hpics.li/30eea38

http://hpics.li/9e36f92

Do you thing I should do the reseat of the LDVS cable?

Thanks

由完成的

What's showing up on the external monitor?

由完成的

Everything, I pressed cmd and F1 and I can use the laptop as I used to use it.

Everything works fine with external monitor, but with the integrated display I get the blank screen as we can see in the pictures, any thoughts?

由完成的

I would examine the LDVS port on the logic board, see if anything is amiss. Also the cable and make sure it is fully seated.

由完成的

i will try everything you said and come back with the results.

many thanks Mayer

由完成的

显示更多的3条评论

添加一条评论

更多选项

It might be that something went wrong somewhere during the repair and you got something along the backlight circuit shorted. You should start with testing the backlight fuse for continuity. It's the part number F9800 on your board..with a little googling you should be able to find the necessary references to locate it.

It's on the bottom side of the board, quite near the magsafe connector. Sorry but I don't have any board like yours at hand to take a pic.

这个答案有帮助吗？

是 否
得分 1

2条评论:

https://postimg.org/image/uqxa4o25r/

I juste took a look and they are fine.. backlight its ok.. I can control the brightness with no problem, the screen goes darker or brighter as normal but always with a blank (white) screen..

由完成的

At this point it sounds like @mayer solution is the only reasonable one left, a bad display after another.

由完成的

添加一条评论

添加你的答案

Bruno Pereira 将永远感激不已
浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 103