My behringer b212d music cuts off when playing and the volume is set around 1/2 to 2/3? The next day it comes back on. I notice if the volume is set real low the music does not cut off for a long time. I DJ, so I need the speaker to work like it was designed to do.
声誉积分: 782.4千
1.1千
893
2.3千
@jeffburt27 sounds like bad amplifier IC's. Use these guides to disassemble your amp and take a look at the circuit boards. Check the IC's for obvious damage. Post a couple of images of what you see with your question. For that use this guide. That way we can see what you see.
这个答案有帮助吗？
过去 24 小时： 0
过去 7 天： 5
过去 30 天： 14
总计 1,314
2条评论
My Beringer speaker keeps going low to high. How do I fix it. I already changed the fuse
由 A Ms Prince 完成的
I am experiencing this when I am playing a guitar and vocals through into the mixer. Suddenly my microphone went quiet then didn't have any output at all. I changed the cable and it was louder again. Then on another occasion the same thing happened again. This is a fairly new power amp but the speakers are old. Could it be that the speakers need replaced?
由 William Oke 完成的