跳转到主内容

发布于2015年3月,并在2015年4月10日上市。盖乐世S6是盖乐世家族又一部旗舰机型。其曲面屏版本被称为盖乐世S6 Edge。

487 个问题 查看全部

How Replace Front Glass of Samsung S6?

I need to replace the broken front glass on my Samsung Galaxy S6. I have a replacement glass panel.

The instruction here do not detail replacement of just the front glass:

三星盖乐世S6的屏幕更换

Must I remove the back panel and all else to replace just the front glass?

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
1条评论

Pls my case looks somehow different, cos my s6 LCD broke not the glass, can I get only the LCD screen

完成的

添加一条评论

2个答案

已选择的解决方案

Attempting a Glass only repair is extremely difficult and would not attempt it unless you have experience with it. It is best to remove the screen from the rest of the device before separating the glass from the display. this helps in avoiding glue from getting into the rest of the phone and causing more damage. if you don't have experience doing this type of repair i would recommend having a Full Screen assembly ready in case the LCD is damaged.

这个答案有帮助吗?

得分 3

1条评论:

Thanks for getting back so quickly.

I see what you mean about the difficulty in replacing just the screen.

I do have prior experience replacing LCD screen on iMacs and on older iPhones. That's a piece of cake compared to the glass on the S6!

The videos I've seen for replacing the front S6 glass have all been unsuccessful.

I had bought a replacement front glass on the interweb for $30. Of course that shyster site didn't mention it was impossible to replace just the front glass!

Argh!

Any suggestions where I could get the complete LCD/front glass assembly? Some videos refer to the substrate layer under the front glass as the AMOLED?

完成的

添加一条评论
最有帮助的答案

The "Amoled" is a foil type material on the exterior back of the lcd. Watch a few videos on the screen separation instructions, it has a very strong double sided tape holding the lcd (one side is placed on the Amoled) to the inside of housing. When heating the phone to soften the tape to prepare for separating the lcd assembly, you must be extremedy careful with the lcd. It is as fragile as an eggshell and very easily cracked during the separation process. If you are very gentle and patient, keep the screen heated at all times to about 100 Celsius using ultra thin plastic pry picks (business cards, playing cards, etc.) And careful not to enter the lcd (be certain to be under it and away from flex connections) . Once sucessful, the hard part begins, lol. Separate the glass from lcd using heat and playing cards, business cards, unless you have a separating machine and wire. Careful cleaning the lcd, keep the edges free of solution and protected from Loca...both get inside the lcd easily prior to uv drying.

这个答案有帮助吗?

得分 4
添加一条评论

添加你的答案

randyvenier 将永远感激不已
浏览统计数据:

过去 24 小时: 1

过去 7 天: 2

过去 30 天: 4

总计 17,883