修复你的物品 社区 商店

iPhone 3G是第二代iPhone。型号A1241，有8或16 GB容量，和炫酷的黑色或洁白的白色塑料背面。修复比第一款iPhone更简单。需要螺丝刀、撬撬工具和吸尘工具。

1158 个问题 查看全部

更多选项

What do the numbered ribbon cables do specifically?

I recently replaced a cracked display, and also a battery in my iPhone 3G. Worked great for a few weeks until the white screen of death started to appear when I press the menu button or the power button. Lately it is getting worse. I can get the display to work with persistance, but it's a pain.

I am wondering if maybe one of the cables is loose or something. I have taken it a part a few more times and disconnected and reconnected a few of the ribbon cables, (helps a little bit- but the white screen eventually returns) but I would like to know what ribbon cable corresponds to the display, or what part I can look at to see if maybe I reconnected it poorly.

anyone?

已回答！ 显示答案 我也有这个问题

这是一个好问题吗？

是 否
得分 3
2条评论

Is this the part you're talking about? iPhone 3G/3GS Headphone Jack Assembly

由完成的

no, I mean the ribbon cables that are labeled 1, 2, 3, 4, 5 and 6. like this one, for example:

http://s1.guide-images.ifixit.com/igi/pw...

由完成的

添加一条评论

4个答案

筛选条件:
最有帮助的 最新 最老的
已选择的解决方案

更多选项

Cable 1 LCD display

Cable 2 Touchscreen sensor and home button

Cable 3 earpice speaker and proximity sensor

4,5,6 are I believe GPS, antenna and camera cables.

That is what I can tell by opening it up.

这个答案有帮助吗？

是 否
得分 6

6条评论:

You are correct about most of them- However, 4,5 & 6 are actually dock connector, headphone/volume/power/vibration, and antennas, respectively. :)

由完成的

thanks

由完成的

Good to know Josh.

由完成的

Very strange, I snapped part of the volume rocker cable (as we know connected to the earphone jack and power) now my home button isnt working, what do you think is up with that!? any help? thanks :)

由完成的

This was very helpful. I am the kind of person who likes to check things before finishing up. I had the screen lose before tightening the last two screws and tried testing it but the home button was not working.

The reason the home button was not working was because it is connected once you push the screen in closed.

Once again, very helpful and good information. Thanks!

由完成的

显示更多的1条评论

添加一条评论

更多选项

the home button has it's own contacts that connect when the device is closed, it isn't fed through ribbon cable 2

这个答案有帮助吗？

是 否
得分 4

2条评论:

quite right, well spotted! +

由完成的

I would advise people to be careful when opening and closing their iphone's, as i managed to break the little contacts off (both of them) and had to solder two small wires bent in a "U" shape, to replace the functionality of the previous contacts.

由完成的

添加一条评论

更多选项

Although the home button is a separate entity and connects upon closing, if cable four is disconnected the it will not work.

这个答案有帮助吗？

是 否
得分 0
添加一条评论

更多选项

sometimes the ribbon on the display lcd goes bad and you will get a white screan. replace full assemble should work . i had the same problem replaced the full lcd srean and it works great. good luck.

这个答案有帮助吗？

是 否
得分 0
添加一条评论

添加你的答案

James Elston 将永远感激不已
浏览统计数据:

过去 24 小时： 3

过去 7 天： 6

过去 30 天： 14

总计 72,463