pollytintop@yahoo.com
帮助
pollytintop
@pollytintop
pollytintop
| 75,940 | 信誉积分 |
| 1,333 | 解决方案 |
| 6 | 指南 |
| 于2010年06月09日注册 | |
I've been a regular visitor/contributor to iFixit for about 2 years now and I thought it was about time I updated this profile page.
In 2010 I bought an iPhone 3gs as a birthday treat and it was stolen 2 weeks later. Not covered by insurance I then frantically searched eBay for a replacement.... and thought why do all these people buy broken phones? I searched how to fix broken iPhones and came up with iFixit's site. Needless to say I bought a broken phone, fixed it and decided to fix some more to pay for holidays and bills.
After 2 years of fixing things on a small scale I've decided to sell off all my iphone stock and find something new to repair. The iPhone 3G is always going to be a favourite but I've become stale and need a new challenge. I'm actually interested in clocks and watches at the moment, maybe it's because I'm just a little bit cuckoo? I've also got a long-running project of a marconi radiogram to restore which was part of a junkfest challenge before christmas.
Since finding this site I have dug out all the things I have kept thinking one day I'd be able to fix them. My trusty kodak was one of them... I fixed the kodak, found another in the cellar, repaired that, fixed a broken nintendo ds, repaired it again and again and again. Since joining ifixit I have repaired all manner of things that I put away to sort out later... trouble is I put lots of things away to fix later....
*update October 2018... still have a cupboard or 3 full of things needing fixing. Now have a garage with a 1960 beetle and a 1974 Kombi *sigh* some people never learn!!
团队
-
Master Techs
Working to save the public money and time.
投票
2918
53
you need to lift the power board/box up vertically first as there are 2 long prongs extending up into the box. if you try to lift just one end you will bend the prongs.
MINISCULE amount of solder...
you're welcome shai, hope all the other repairs go so well
it should be ok.
"wipe" means with a cloth moistened in alcohol.
put your fingers at power button end of phone, resting on edge of glass/bezel you can use them as lever so when you pull on suction at other end you don't need to apply much pressure and the cables underneath aren't ripped off