The new hard drive won't slide in

Question

MacBook Core 2 Duo

Model A1181: 1.83, 2, 2.1, 2.13, 2.16, 2.2, or 2.4 GHz Core 2 Duo processor

1204 个问题查看全部

rsweeney79 @rsweeney79

声誉积分: 35

1

发帖于: 2010年5月6日

更多选项

The new hard drive won't slide in

I am installing a new 500 GB 7200 RPM Seagate SATA Hard Drive. I am at the point of sliding the new HD in the silver bracket back into the Mac, but it doesn't seem to want to go the last 1/2 cm or so. I don't want to force it as I am pushing pretty hard. When comparing the new HD to the old one, there is a difference in the area around the 4 copper pins (jumper block). The new one has a plastic collar or border (see http://www.seagate.com/images/support/en...), while the old one doesn't. Could this be making a difference?

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 2

1条评论

well stated question +

由 mayer 完成的 2010年5月6日

添加一条评论

1个答案

已选择的解决方案

040304 @o40304

声誉积分: 9.8千

59

62

17

发帖于: 2010年5月6日

更多选项

I have had this problem, and for me it was the rubber shock grommet bunching up around the corners in back and preventing the HD from sliding in the whole way. I took the top case off and put the grommet around the HD and placed it in. Then it worked.

这个答案有帮助吗？

是否

得分 6

6条评论:

I'll give your solution a try. That maybe the problem. My wife had originally installed the new HD upside down. Perhaps that bunched up the rubber shock grommet. I just tried re-installing the original HD and it won't slide in either. Thanks.

由 rsweeney79 完成的 2010年5月6日

That was absolutely the problem! The rubber shock grommet was bunched up and not allowing the HD to slide in! Kind of a cheap way to have the grommet attached on both sides though.

Thanks so much for your great answer!

由 rsweeney79 完成的 2010年5月6日

excellent +

由 mayer 完成的 2010年5月6日

I had the exact same problem! thankfully i found this and realised what had happened. and it was easy to fix once i knew what to do!

thanks alot guys!

由 Alex 完成的 2011年11月23日

Thank goodness I found this - I couldn't work out why the hard drives wouldn't slide back in (new one or old one!!).

Took top case off using iFixit's guide, repositioned grommet and it was all fine :-)

Thanks everyone!

由 Neil L 完成的 2010年6月5日

显示更多的1条评论

添加一条评论

I'll give your solution a try. That maybe the problem. My wife had originally installed the new HD upside down. Perhaps that bunched up the rubber shock grommet. I just tried re-installing the original HD and it won't slide in either. Thanks. — rsweeney79
That was absolutely the problem! The rubber shock grommet was bunched up and not allowing the HD to slide in! Kind of a cheap way to have the grommet attached on both sides though.

Thanks so much for your great answer! — rsweeney79
I had the exact same problem! thankfully i found this and realised what had happened. and it was easy to fix once i knew what to do!

thanks alot guys! — Alex
Thank goodness I found this - I couldn't work out why the hard drives wouldn't slide back in (new one or old one!!).

Took top case off using iFixit's guide, repositioned grommet and it was all fine :-)

Thanks everyone! — Neil L

MacBook Core 2 Duo

The new hard drive won't slide in

1个答案

添加你的答案