型号 A1238 / 80, 120, 或 160 GB 硬盘 / 黑色或银色面板

931 个问题 查看全部

no sound comes out

I've just spent a week trying to solve the same problem on my ipod classic (the antiquated version purchased in around 2004 - 80GB). Apparently the software is updated (version 1.3), but no sound from any docking station, itrip, speakers or headphones. You can hear the static of the headphones / speakers being plugged in, but no sound comes out.

Any suggestions?

已回答! View the answer 我也有这个问题

这是一个好问题吗?

按维修分数 0
添加一条评论
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1个答案

已选择的解决方案

Bronwyn, first you should tell us if it syncs properly and if you can access your files with music while the iPod is in diskmode. After that you want to place your iPod into diagnostic mode and see if you get any errors (you may get a FW error). If none of that shows any issues, you may have problems with the audio IC. In the case of your iPod I am leaning more toward this problem. This particular model has a problem with an IC on the logic board. You can try and see if you get sounds by applying some pressure to the right lower side of the ipod, almost between the click wheel and the bottom corner. If you should get sound by doing so, then you only have very few options. One is a new logic board, the other one is to reflow your old logic board. Or you can try what warnergt did on http://forums.macnn.com/103/ipod-iphone-... By now I can verify that this works since I performed a reflow on three of the boards and it solved the problem. The logic board is of course available at ifixit as well." Hope this helps, good luck.

这个答案有帮助吗?

按维修分数 1
添加一条评论

添加你的答案

Bronwyn 将永远感激不已
浏览统计数据:

过去的24小时: 3

过去的7天: 16

过去的30天: 52

总计 1,335