GameSir Cyclone 2 Stick Drift

If the cursor on the screen is still active and moving without either of the joy cons being touched, follow this troubleshooting page for possible solutions.

Clean around the base of the stick using isopropyl alcohol (70%+) and a cotton swab. Move the stick while cleaning to reach inside. Let it dry fully before testing.

Recalibrate the stick in the system settings of your console and follow instructions on your screen. Review and follow the instructions on the GameSir website. Instructions on how to calibrate the stick can be found tutorials page for the device.

If the joystick is worn or damaged, replace the analog stick module.

== ==