Mitch

Hi All, I replaced the screen on the iPhone X and now the cameras (front and rear) and face ID don’t work. The camera app...

Hi All, I installed a new track pad on a 13” 2014 MBP. There was liquid damage to the old one which caused the mouse to...

Hello all, I have a situation I haven’t seen before. A customer brought me an iPhone SE with a cracked screen. I put a...

Hi All, A customer brought in a Lenovo Yoga 900. The screen would blank out intermittently. The screen would come on/off...

It looks like there are pretty good prices on that site. I am curious about the quality and shipping to the US. Thanks! Mitch

Hello all! Any suggestions after replacing the USB board and trying a different battery and still no response from the...

Hi All, I have replaced many iPhone 6 models with ease. This time I replaced the screen. The customer called me the next...

The question says it all. This is my first experience with a phone getting abnormally hot after installing a new display...

Does anyone know if repairing the Z3 panels are similar or the same as the Dual?

It turns out it was an issue with the power chip on the board and needs to be replaced which requires micro soldering.

It's very unlikely you will find a good replacement screen for the BLU Studio 5.0. I searched through my usual vendors and did not find anything. You'll have to take it in. Good luck!

Any of the scenarios they mentioned could be the problem or it could also be a defective screen. I have had a hard time finding quality 6+ screens online. Maybe someone else knows of a reputable source. Did the seller have a good reputation showing a good amount of success with this screen?

You can also get one on Amazon with a very high customer feedback rating. John is right. 85w only.

Hi All,

I replaced the screen on the iPhone X and now the camera and face ID don’t work. The camera app is black when I open it. I can’t test the proximity sensor because there is no cell service on the phone. I assumed I damaged the flex cable so I put a new one in and same result.

I put the original flex back on the original screen and same result. I am not sure if face ID or the camera was working before the repair. I normally check what is working and what isn’t, but I forgot to this time.

Thanks!

Thank you for making this guide. It is an excellent step-by-step solution for the most common problem when it comes to iPhones. I will continue to use iFixit repair guides as my go-to source for my Computer and Phone Repair business.