Skip to main content
回答“How much is screen replacement”
you can do this your self. https://goo.gl/doAHd4
回答“iPhone6 got wet was working until turned off to dry”
This info for all people who dropped phones in the water. 1 Switch off device. 2 Remove SIM card with card holder. 3 Use hair dryer to dry your device. (Warm 80-100 degrees for 15-25 minutes.)
回答“What SSD is suitable for my MacBook Pro?”
Hi It doesn't matter all versions of SSD 2.5 can acceptable.
回答“Screen won't close tight after display replacement”
Hi Perhaps your phone frame is bent, because of this skew the screen does not sit tight to the frame
回答“Samsung Galaxy J7 pro - J730GM touch screen not working”
I do not think that the problem is in the update. it is possible that water got into the phone or you dropped the phone. You should ask some one with knowlege to open this phone and check inside.
回答“Magsafe connector Scalding hot when charging”
i think you have bad contact with pins on charger or charging port on laptop, i sugest you use eraser to clean up those pins on charging port. Eraser helps me to remove oxides on contacts
回答“My HTC one sv won't charge”
try change charger cable and power supply.
回答“Could I use liquid metal for thermal interface material?”
Some liquid metal dissolves aluminum alloy, be careful.
回答“Screen goes black when turned on after 15 seconds”
i think you have problem with backlight on TV, try this -> turn on the TV and wait for the screen to turn off then take the flashlight and shine on the screen if you see the image it means you have problem with the backlight.
回答“iPhone 6 plus no backlight”
For micro soldering you must have a microscope. About backlight, you need view mother board in detail under microscope, in 80% you can find suspicious SMD components on board, and fix your Phone.
Page 1 of 2