If you put a few game cases (or something similar in size ) under the front of your xbox. So the front is higher than the back. It may help your xbox read a disk. It's A temporary fix that may help get you by without spending money, and I've seen this work multiple times.
You could easily repair it yourself. I assume this is the part you need, you need to double check to model numbers. https://www.amazon.com/gp/aw/d/B018FXD6R...-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords... And here's a comprehensive guide. 三星Galaxy Note 4屏幕组件的更换 Good luck
Double check you connections, by disconnecting them and reconnecting them. This is a common problem. If you have a clear picture without lines or blackouts that means your lcd is fine. If your touch still isn't restored. Try again once more. To make sure that the connections isn't the issue. If still no prevail, reattach the old digitizer to make sure that some thing didn't shirt out. If the old one works, the the problem lies with the replacement. inspect the ribbon wires attached to the replacement for bends or creases. If nothing can be visibly seen. It's likely you just bought a did. It happens more often then you would like to think. If that's the case, you need to contact the seller for a replacement or refund. Good luck.
I did some research and this is the best I could find. https://www.etsy.com/listing/500666248/1...-pairs-20-pieces-5mm-6mm-7mm-8mm-10mm?&utm_source=google&utm_medium=cpc&u...-craft_supplies_and_tools-doll_and_model_supplies-doll_parts&utm_custom1=0f9784d1-1385-49f7-bf29-12e8a54ca34b&gclid=CPr-y4261dMCFQiMaQodz1IHMA
It is possible for you to do, but very very difficult. You going to need: 1.optical grade adhesive 2.Adhesive remover 4.A way to heat the glass so you can separate it from the lcd. You can do it with a heat gun, but that's the cheapest and hardest way of doing it. I used something like this as my first step up from a heat gun https://www.amazon.com/gp/aw/d/B019OA35J...-3&pi=AC_SX236_SY340_FMwebp_QL65&keywords...