Max Tech

This iPhone 5S boots into Recovery mode. When connecting to iTunes and clicking restore, the device turns off right after...

I got a nokia 6310i i would like to upgrade to (coming from 3310). After taking it out and testing the battery to make...

Not very sure, but if i recall correctly, these models are plagued with GPU issues. A ‘fix’ would be to disable the discrete gpu and only use the intel internal graphics. (You will lose performance, but flickering should be gone ) Here’s a link: https://apple.stackexchange.com/question...-pro-how-to-disable-discrete-gpu-permanently-from-efi

The brand should not matter as long as the form factor is the same. The 27 inch iMac 2011 uses a 3.5 inch drive. So you’ll want a 3.5 inch replacement drive. If you want to use an ssd, you’ll have to order an adapter/bracket to allow a 2.5 inch drive to fit as ssds only come in 2.5 inch form factor. I hope this helps. Feel free to ask more questions

i think the fans running at full speed can be caused by a broken palm rest temperature sensor. as far as i know, when the system detects one of the temperature sensors doesn't work, it makes the fans run full speed (that's at least what happened with my iMac when i broke the hard drive temperature sensor. You might've either damaged the sensor or the cable during the removal of the old battery. I don't know how to replace that palm rest sensor though.

Hello, Check this guide out for a list of tools. Basicly, you’re going to need a P5 Pentalobe screwdriver, a T5 Torx screwdriver, a spudger, your thermal paste, and a cloth to wipe off the old paste. That list is also at the top of the guide you mentioned. right under the introduction. There are also easy “add to cart” buttons for each mentioned tool. If you’d like, you can also just get the ifixit Pro Tech Toolkit. It comes with many tools and all kinds of bits to get the most stubborn and special screws out. Good luck fixing/replacing the thermal paste! Maxim

Hello, Probably the laptop shuts down because it has reached a CPU temperature that can damage the system. It’s a safety system inside most computers. If you want to learn more about the safe temperature of computer parts, i highly recommend this video. Also, when does the overheating issue occur? Is it when eg. using your browser? Or are you using applications that use a lot of computing power? Kind regards, Maxim

Send a mail to Pi-Top support, they gave me a new battery base for free.

Hello, Try sending a mail to Pi-Top support. They gave me replacement parts for free.

I'm afraid you can't recover any deleted messages... Mostly these are permanent adjustments.

This usually means there's still water in the phone and/or in the headphone jack (rice doesn't work to dry the insides of the phone) Try using a Qtip to dry the headphone jack and rebooting the phone again.

Try looking on the Nokia website from the past. With a little luck you can find a lot there. You can time travel the internet with http://web.archive.org It's really useful.