Canon printer uses small, spongy pads to absorb ink, while printing the print heads. when these pads are sopped the printer send a message that"Ink absorber Full". Follow these steps to clean the Ink absober 1. Take a bowl with warm water and add some soapy material 2. Open the ink cartridge compartment 3. wait for ink cartridges and disconnect the printers power cord 4. Look balck rubber frame under the ink cartridge 5. pull the rubber frame out of the printer and remove ink absorber pads 6. clean the pads in the bowl 7. After cleaning stack them three or four paper towels to dry 8. and check the pads whether they dry or not 9. Place the pads back to the rubber frame 10. Now reconnect the power button and start
Follow these manual steps to clean printer head Step 1: Remove the ink tanks and printer head step 2. soak the printer head step 3. flush the printer head with water step 4. dry the printer head and replace Remove the printer head and clean it with distilled water, shake it dry towels to air dry Reinsert the paper head and ink tanks.