spearson

I ordered a replacement rear iSight camera from iFixit as the previous one was causing the camera app to freeze. After...

Hi everyone, I have a client who has a MacBook 13" with an LCD display that overtime (she says she didn't drop it) started...

Hi I'm sure this has been asked before. I replaced the battery in my friend's MacBook yesterday without a hitch and the...

Hi, A client of mine had issues charging her MacBook Pro 13", it would charge sometimes, the green or orange light would...

Can you adjust the tension screw on the white plastic Unibody MacBooks or does one have to replace the entire top case? If the tension screw can be adjusted, what screw driver is needed. I have a client with a trackpad that doesn't click. The battery looks to be in good shape, not bulging.

When I did it, the metal part didn’t pop out and stayed in. I just lined it up with the screw hole on the upper right side as the metal part also had a hole. I assume it’s to bridge something. Hope this helps.

When I did it, the metal part didn’t pop out and stayed in. I just lined it up with the screw hole as the metal part also had a hole. I assume it’s to bridge something. Hope this helps.

You can find batteries at MacSales (Other World Computing) by going to Shop All > Batteries & Battery Chargers and selecting your exact model Mac from the list. If you have questions you can chat with them directly to make sure you get the exact battery for your machine as not all batteries are the same.

As always, you’ll need to calibrate the new battery.

Hope this helps.

Good question, I’ve been wondering that too.

I had the same experience as you this was super easy to remove as well.

I had the same issue of trying to get the ZIF cable back in but found that if I used a piece of scotch tape, it worked. I followed this guide. MacBook unibody keyboard ribbon cable won't go in